General Description
CMKP Low Voltage Three Phase Shunt Compensation Power Capacitor are packaged in a one-time stretched aluminum shell, which is safe and free of pollution.
Structure
● Packed in a one-time stretch aluminum case;
● Pollution-free;
● Built-in overvoltage device and discharge resistor;
● The capacitor element is made of high-quality high-temperature metallized polypropylene film;
● The component uses a large-diameter mandrel, which greatly improves the voltage resistance;
● The bottom of the capacitor is the mounting screw of M12 (or M16), which does not need to be grounded.
Working conditions
● Altitude: ≤2000m;
● Ambient temperature category: -25 / C (min. temperature -25 ° C, max. temperature 50 °C, average temperature within 24 hours does not exceed 40 ° C, annual average temperature does not exceed 30 ° C) Capacitors should work in well-ventilated conditions;
● Ambient humidity: ≤90%;
● After the capacitor is cut off from the power supply, it must be ensured that the capacitor voltage drops to 10% of the rated voltage before it can be put into operation again. Usually this time is 180 seconds. Therefore, a controller with a delay input function should be selected. For zero potential switching The controller can be exempt from this limitation.
Model Description
Main Model
http://www.zhiyuele.com/